Tables & Altars
We make tables in our own workshop using mainly reclaimed timbers and where possible legs that have been reclaimed from old tables ranging from mid Victorian to late Edwardian styles and beyond.
We can also make tables using square or tapered legs or with flat pedestal ends and, can even work to a design of your choice. These tables can be made to almost any length in oak, yellow pine or pitch pine depending on what we have in stock at the time.
Below are some examples of tables we have made and also some tables and altars reclaimed from churches.
Please get in touch with your requirments and we can create a table just for you.
Altar Stock Code 0200
Beautiful oak altar with arts and crafts stylings. General wear and tear as to be expected from an antique. Lots of potential as could be used as a bar, kitchen island etc
Dimensions
Length 1690 mm
Height 875 mm
Depth 590 mm
Oak Table Top With Painted Legs
This table was made 1300mm x 770mm at our customers request. We stripped the oak top and then varnished it. The legs were painted white to match the customers kitchen.
For a made to measure table please contact us with your requirements.
Solid Oak Table
Solid oak table made from old reclaimed timbers.
The legs were sourced from an old joiners workshop that one of our trade customers had cleared out. They were probably turned about 25 years ago. We have stripped the old varnish off so that all the timber matches and have given it a traditional wax finish.
We have other legs similar to these and some very nice 300mm wide boards to construct the top from.
Dimensions
Length 2000mm
Depth 800mm
Height 760mm
Pine Top Table
Pitch pine top on a painted pine base. This table was made from reclaimed materials apart from the legs which are new. We can make these to almost any size.
Large Pitch Pine Table
Large pitch pine table made from reclaimed materials. Can be made to almost any size but the legs will always differ as they have been reclaimed from an older table. We have a good stock of original legs and are happy to send pictures of legs prior to constructing the table.
This is an unusual sized table as it is 5 feet square! It was made specifically for a client and old billiard table legs were used.
This is another example of one of the styles that we can create to almost any length and width.